Some functionality on this website does not support Internet Explorer.For the best experience, please try another browser such as Microsoft Edge, Google Chrome or Mozilla Firefox.
Cladco Composite Decking Starter Clips provide an accurate and precise fitting for composite decking boards when installing against a wall or a fence.
The ability to fit your composite decking project correctly from the beginning is a must. Cladco Starter Clips will help to avoid any unnecessary changes during the installation process.
Made from precision-cut stainless steel, our Composite Decking Starter Clips are made to last, being both tough in design and purpose. Having increased corrosion and wear resistant properties, our Composite Decking Starter Clips will last the lifetime of your decking project to give added peace of mind.
Starter Clip Specifications Measurements: 27mm x 10mm x 6mm Material: Stainless Steel Pack Size: 50
We recommended using 25mm stainless steel screws (not included) to fix these Starter Clips.
Packs contain 50 Composite Decking Starter Clips. We recommend one pack per installation project as a guideline, with our handyComposite Decking Installation Guide available to help when you need it.
These Stainless Steel Starter Clips are for use on Cladco Composite Decking products only, and are not to be used in conjunction with Aluminium Decking products
Please note: Screws are not supplied with our Starter Clips.
Sample packs are sent via Courier and delivered within 3-5 working days.
Pricing Table
TYPE
WHEN?
HOW MUCH?
National Delivery
(Orders under £1,000)
Estimated 5 working days*
£192.00
(Orders over £1,000)
Estimated 5 working days*
£96.00
(Orders over £1,500)
Estimated 5 working days*
FREE
Scotland Delivery
Estimated 15 working days*
£360.00
Millboard Delivery
(Orders under £2,000)
Estimated 5 working days*
£192.00
(Orders over £2,000)
Estimated 5 working days*
FREE
Parcelforce Standard (Small Parcels)
3-5 Working Days
£8.50
Parcelforce Standard (Large Parcels)
3-5 working days
£30.00
Sample Packs
5 Working Days
FREE
*Please allow for public holidays and weekends (non-delivery days)
When your goods are delivered these are sometimes delivered on a pallet with the necessary
associated packaging to ensure they arrive with you in the best possible condition. We view the pallet and
packaging as necessary for the protection of the goods and therefore will be a part of what is delivered to you.
It is your responsibility to dispose of these items in a responsible manner when appropriate.
Composite Decking Starter Clips make the process of installing Composite Decking a lot easier. Using Decking Starter Clips will get the most out of your product by making sure it’s installed properly at the beginning of its life.
Are screws included with the Starter Clips?
No, screws are not included. It is recommended to use 25mm Stainless-Steel Screws for installation.
Why is it important to double Joist and use two Clips at adjoining Boards?
When our Composite Decking Boards expand and contract, they must be securely fastened to minimise movement. A single Joist may not provide sufficient surface area for the ends of two Boards to be properly anchored. Using double Joists at adjoining points ensures each Board end is attached to a joist, increasing the stability of your project. Adjoining Boards should never share the same Clip, and should be secured using two clips per Board end.
This method will improve the structural integrity of your Decking; especially in high-stress areas like the ends, where foot traffic, weathering and material contraction or expansion increase the strain on your Decking.
Adhering to these guidelines will help ensure proper installation and longevity of your Composite Decking. Failure to follow these guidelines will invalidate the product’s warranty.
